公司簡介 分條機 CNC裁剪機 週邊產品 風剪機 業務聯絡 回首頁
page1-Slitter1
page2-Slitter2

FEATURES FOR AUTOMATIC SLITTER LINE

u1.By means Programmable Logic Controller (PLC). System performance is based upon the characteristics of various Metal Sheets, and switches High/Low Speed operating Mode automatically, so as to achive improved efficiency and reduced maintenance dramatically.

u2.For lower malfunctioning, the material uncoiler uses an expand / shink hydrulic cylinder that is mounted on an integrated steel frame.

u3.The material uncoiler is equipped with a high efficiency disc-type brake, its tension is adjusted by the air-pressure loop. Under this circustance, the time for tension adjustment is reduced, also, the forced mometary braking is occurred thus free from loosen of coil.

u4.The pre-loader is equipped with DC Various-speed motor drive, so that a syncheonized speed cooperate to the production line could be governed.

u5. Slitting Knives are mounted on an integrated frame with a separated transmission, that means enhanced rigidity structure of machine, lower vibration amplitude of Knives, and excellent yields could be produced.

u6. The datum plane and accuracy of Slitting Knives' axes are all to be fabricated within 0.006mm. in tolence, so that makes higher duration of Slitting Knives and much excellent accury of outputs of the Slitting Line.

u7. For securing the stability of Slitting Line during operation, the tension controlled roll-up device with slip-differential strcture is designed for the waster.

u8. The straight type tightener uses high elastics and resistive carpet as surface materials, so keep the outputs of the Line smoother. In addition, it also equipped a pressure-balance device to keep an even-pressurre over the both side of materials that touched with the tightener

u9. The Recoiler is equipped with an improved/high rigid holder, that causes reduce of lead time. An air-pressure adjustable back-pressure device is equipped on the separator mechamnism, so that a constant hold-pressure could be reached for re-coil.

u10.
Self-tension design enable to retain a better tightness during re-coil.
MODEL
Thickness(mm)
Width(mm)
Slit Strands
Speed(Max)
GZS-150
0.3~2.3
200ã600
2-20
3~5
GZS-175
0.3~2.3
600ã1200
4-30
10~15
GZS-185
0.3~2.3
900ã1600
4-30
10~25
(1) For material thickness over 2.3mm upto 6.0mm, machines are available under special offer.
(2) The offered specifications of delivered machines are based upon our formal quotation and contract.