PhotoI:
SPECIFICATION:

Steel pipe diameter:1/2"ã2"
Steel pipe thickness:0.7ã3.2㎜
Power:57.5
Speed of pipe making:120m/min Max
High-frequency Welder:100kw

PhotoJ:
Model Width outer diameter inside diameter
GE200 TYPE 10ã200m/m 400ã800m/m 200m/m以上
GE300 TYPE 20ã300m/m 500ã1200m/m 300m/m以上
GE400 TYPE 25ã400m/m 600ã1400m/m 400m/m以上
PhotoK: A÷­±¡
1.Transfering Function: By using the conveyor to transfer the cutting materials to the stacker, thus auto-stacking is done properly.
2.Edge-trimming Slider: An Edge-trimming Slider can be operated by the foot-switch is Located in front of the stacker, therefore, trimming could be carrying out before stacking.
3.Special Treated Convering Belt: The Conveying Belt with special wear-proof materials that makes belt with excellent duration.
4.Inverter: By adjusting the potential meter, the speed of conveyor can be changed as desired.
5.Lifter: By using the Hydrulic-powered Lifter, the falling distance of the cutting materials from the conveyor can be reduced that keeps cutting sheets from scratch.
6.Carrier: The Lifter which is mounted on a Power-controlled Carrier, that can be moved back and forth for stacking different size of sheets.
7.Photo Probe: A Photo Probe is used for controlling the height of Lifter so that the height of stacking materials can also be controlled automatically.
B-Support-type:
(AUTO-STACKER FEATURES )
B-Support-type:
1.Supporting Function: By means of the Roller-Support, and it can be reached to the same height as shearer , thus the falling sheets can be supported while cutting is made in order that keeps the dimensions from distortion.
2.Transfering Function: By using the conveyor to transfer the cutting materials to the stacker, thus auto-stacking is done properly.
3.Edge-trimming Slider: An Edge-trimming Slider can be operated by the foot-switch is Located in front of the stacker, therefore, trimming could be carrying out before stacking.
4.Special Treated Convering Belt: The Conveying Belt with special wear-proof materials that makes belt with excellent duration.
5.Inverter: By adjusting the potential meter, the speed of conveyor can be changed as desired.
6.Lifter: By using the Hydrulic-powered Lifter, the falling distance of the cutting materials from the conveyor can be reduced that keeps cutting sheets from scratch.
7.Carrier: The Lifter which is mounted on a Power-controlled Carrier, that can be moved back and forth for stacking different size of sheets.
8.Photo Probe: A Photo Probe is used for controlling the height of Lifter so that the height of stacking materials can also be controlled automatically.
PhotoM:
Model (Table) (loading weight)
GZ4810 4Ñ8(ft) 10 Ton
GZ5110 5Ñ10(ft) 10 Ton
PhotoL: